In spite of great the Apple AirPods are, there are many quirks that disturb its users. As of now, some users are complaining that their Airpods are very quiet. They don’t seem to enjoy the music in that case. Nowadays, users are complaining that their AirPods are so quiet they can’t even hear properly.
Let’s say you’re on an important phone call or meeting, but the ambient noise prevents you from hearing the other person. Or perhaps you just want to listen to some songs on your way to the office. But they are quite as silent.
If you were hoping for a louder sound from your expensive AirPods but have been disappointed, you’re not alone. That’s why we rounded up these fixes to increase the volume on your AirPods so you can get the most out of them.
Why Are My AirPods So Quiet?
Your AirPods are so quiet because they are not connected accurately. It is also possible that your AirPods are dirty, and noise is being suppressed due to that. Other than that, there can be a firmware issue that is not updated at the moment.
Finally, your AirPods can have a hardware issue in which case you have to visit your authorized service center. Whatever the reason may be, we will look at some of the best fixes to fix low sound on AirPods.
How to Fix If Airpods Are Quiet?
Here we have listed the seven most potent fixes that are sure to fix the low sound or quiet AirPods issue. We recommend that you follow each of them to know exactly where the problem is.
Put Your AirPods in The Case and Then Take them Out
As simple as it may sound, putting your AirPods back in the case and then taking them out if one of the best ways to fix quite AirPods issue. However, don’t take them out instantly. Instead, put your AirPods in the case, then charge it for some time and then take it out and connect. When connected, check if your AirPods volume is still low.
Check Battery Levels
Due to low battery, your AirPods may sound very quiet or have a low volume. So, make sure you put them on charge and let them completely charge. After that, connect your phone or PC and check whether they are working nicely.
Increase Volume
It may sometimes sound silly, but a whole lot of people who depend on AirPods for their day-to-day life forget there’s even a volume rocket on their phones. As a result, when they start using their AirPods, they use them indefinitely and forget about increasing its sound ever. If the above fixes haven’t helped until now, it is possible that your device’s volume is pretty low, and you should try bumping it up.
Check For Dirt Buildup
Users often keep using their AirPods and forget that dust, pollution, and even wax from their ears can clog the AirPods. As a result, your AirPods will sound quite, even if there can be no sound in the worst cases. You must regularly clean your AirPods with cotton swaps and isopropyl alcohol. If you have any confusion, check out our iPhone cleaning guide because that has all the steps required for efficient cleaning.
Reset Your AirPods
If your AirPods sound is very low, your best option to fix this is to reset your AirPods. Resetting your Airpods is not difficult, but you need to perform the steps on your phone. So, follow these steps to reset your AirPods:
- Disconnect your AirPods, place both of them in the case, and close it.
- Now, on your iPhone, go to Settings.
- In the Settings window, tap Bluetooth.
- Now, beside your AirPod, click on the i button and click on Forget This Device.
- If prompted, click on Forget again.
- Now, open your Airpod case and press and hold the System key for 15 seconds until the amber or green light (depending on the Model) starts blinking.
- Your AirPods will now enter pairing mode. Bring them close to your iPhone and connect them.
Once connected, try playing a song and check whether they sound loud or not. If you are doing this on a PC, you need to perform the same steps, just forget it under your Bluetooth device and connect them again. If this doesn’t help, follow up with the next fix.
Update Firmware
Sometimes old firmware can cause many issues, such as low AirPods sound. Unlike iPhones, you cannot manually update the firmware. However, there’s a way to do it, and that’s simple.
Just connect both your AirPods to your iPhone and let them stay connected for 30 minutes. After 30 minutes, they will be automatically updated. Remember, this fix can not be applied on a Windows PC. You can only use an iPhone or a Mac.
Contact Service Center
If none of the above fixes has helped you till now, it is highly recommended that the AirPods quiet issue is not related to software or dust but a hardware malfunctioning issue. As a result, we never recommend someone to open up AirPods and try repairing it themselves.
Let alone DIY, we also don’t suggest that you take your AirPods to anyone other than authorized Apple Service. This will save you from future troubles as well as the warranty getting void.
The Bottom Line
Well, that’s all we have here about how you can fix if AirPods sound so quiet. We hope this guide has helped you. If the above fixes have helped you, let us know which fix helped you. And if you had to rush to the service center, let us know what they did.
RELATED GUIDES:
- How to Fix AirPods Connected But No Sound
- How To Check Airpods Battery Without Case
- How To Fix AirPods Mic Not Working Problem
- Fix AirPods Not Working and Connecting to iPhone/iPad
- Find Your Lost AirPods or AirPod Case | I Lost My AirPods!
- How To Fix AirPods Case Not Charging Issue
- Connect and Pair Airpods To Windows 11 PC Laptop
- How To Make Your AirPods Louder
