HomeError | FixHow to Fix Hisense TV Not Turning ON

How to Fix Hisense TV Not Turning ON


Hisense is one of the most popular Chinese electronics companies. From its beginning, Hisense has been the largest television manufacturer in China and the second largest worldwide. However, being such a large company, Hisense TVs have some quirks. One of them is Hisense TV not turning on not red light but the blue light is on in 2024.

Many people have recently reported that their Hisense TV won’t turn on. The issue may be simple or complicated, depending on how this happened. So, let’s start our guide and then you can decide about the issue.

How To Fix Hisense TV Won't Turn On or Not Working

Why Your Hisense TV Is Not Turning On?

There are many reasons why your Hisense TV won’t turn on issue. First of all, there’s can be an electrical issue. Next, a corrupt external device can be connected to your Hisense TV that is not letting it turn on.

Electrical interference is common with external devices. As a layman, we often refer to this as a short circuit. And a short circuit is pretty dangerous. It can damage your TV and your entire house wiring if there’s no proper earth.

Either way, the mother of your TV may be dead. Although this is not common nowadays, it can still happen with rough usage or humidity. Unlike Samsung TVs, the Hisense TV entirely depends on the remote; your remote batteries can be out of juice. Last but not least, some kid from your house may have turned on the timer using parental controls, which is why Hisense TV won’t turn on.

Diagnosing Your Hisense TV

If your Hisense TV won’t turn on, here are some common diagnostics you can follow to understand what has happened and proceed with the troubleshooting.

  1. If a red light is flashing when you turn on your Hisense TV, the power board is faulty. Remember, flashing means blinking. If the blinking is continuous, your power board is damaged. You will need to contact the service centre right away.
  2. Now, if you are trying to turn on your TV but when pressing the remote doesn’t make the red light blink, that means your remote is not working.
  3. If you are pressing the hardware power key, but the red light is not blinking, your motherboard is having issues.
  4. If the electricity suddenly goes out while you are watching TV and not your Hisense TV won’t turn out, one capacitor is blown.

If you think none of this has happened to you, you can start with our troubleshooting guide and try to fix your issue.

How to Fix If Hisense TV Won’t Turn On in 2024

Here we have listed six fixes that will surely resolve your Hisense TV won’t turn on issue. However, if the fault is from the motherboard, we recommend you contact the service centers and get it fixes. Also, make sure to follow each fix as they are mentioned, and don’t skip.

Check If Your TV Is On

As silly as this may sound, many people don’t have proper switches at home, and they directly plug in their TV, thinking it is switched on. It is possible that your TV is actually turned off but you are trying to turn it on, but the result is Hisense TV won’t turn on.

We suggest that your first check whether the TV is on or not. If not, plug in the cable properly to a socket with proper earth and try again. Everything is getting smarter, and so are TVs. Make sure you use a proper electricity socket to connect your TV.

Check Your Power Cable and Change It

fix Hisense TV Won’t Turn On

It is possible that there’s an issue with either the power cable or the connecting socket. Your electricity connecting socket may be having some issues. Try using another socket to check whether your Hisense TV turns on. If not, you can also change the power cable and then check.

If you have bought the TV from outside of your country and got it shipped, check for the voltage rating. In the United States, every appliance works at 110V, while in other countries, it is 220V. If this is the case, you may need an AC converter to use the TV, and there’s no fault with your TV.

Check Your Remote

fix Hisense TV Won’t Turn On

Many of us won’t notice, but remote batteries nowadays run out sooner than ever because of higher-range infrared. As a result, if your remote batteries have no juice, it is wise to change them as soon as possible. Occasionally, people spank their TV remotes, thinking that it would work.

And ironically, it does work sometimes. But that doesn’t make a wise choice because this could damage the internals. So, check your batteries and change them if they have no power, then check whether your Hisense TV turns on.

Disconnect Additional Devices

fix Hisense TV Won’t Turn On

Nowadays, TVs are not alone. Especially if you have a high end TV like Hisense, it is never alone. We connect PlayStations, Xbox or any other gaming console, Hard Drives, Flash Drives and what not.

It is possible that one or the other device is interfering with the inside electronics and causing the TV not to turn on. Therefore, disconnect every additional item paired with the TV and try turning it on. It should turn on. If not, follow up with the next fix.

Reset Your Hisense TV Remote

Hisense TV remotes are no-nonsense remotes and feature capabilities that are not known to many owners. One of them is resetting the remote. Resetting is essentially power cycling a TV remote.

Nowadays, remotes have exact same capabilities as other controller devices and a small amount of carbon footprint or electrical residue can hamper connection. Here are some steps you need to follow in order to reset your TV remote:

  1. Take your remote in hand and remove the batteries.
  2. Press and hold the power button on the remote for 30 seconds.
  3. Now put the batteries back and make sure their polarity is fine.
  4. Now try turning on your TV.

Your Hisense TV should turn on now. Unfortunately, if it is not turning on, follow up with the next fix.

Check for TV Backlight

There’s a red LED backlight below the screen of every Hisense TV. Check whether it is turned on. The LED light at the bottom of the display signifies that everything is in the working condition of your TV.

If not, try plugging and replugging, and changing the cord. If the LED backlight is not turning on anyway, it is time to visit the service centers. However, if the lights are on, but Hisense TV won’t turn on, follow up with the next fix.

Reset Your Hisense TV

Sometimes kids or elderly people use the remote in a weird way that can ruin the internal settings. For instance, they may have set a timer in parental controls that are not allowing you to turn on the TV. So, you may either need to wait for 12 hours because that’s the max timer limit or follow these steps to reset your TV:

  1. First, remove all the connected devices and the power cable from your TV.
  2. Now, depending on your TV model, find the power button. It should be somewhere below the screen and beside the backlight.
  3. Press and hold the power button for around 30 seconds. This will drain all the residual power from the TV.
  4. Once you have done this, don’t do anything but wait for 30 minutes straight.
  5. Next, connect the power cable, make sure everything else is disconnected, and turn on the TV.
  6. There’s a dedicated reset button in some newer Hisense TVs at the back. If you have that, it should look like a tiny hole. You need to insert a pin and press that. fix Hisense TV Won’t Turn On

It should turn on now. If not, it is time now to contact the service centres. We don’t recommend you open the back case of your TV because Hisense TVs often come with 2 years of warranty. An additional extended warranty may also be applicable, depending on your seller. Furthermore, if you open up the TV, it will be difficult for you to join it back because of nooks and joints.

The Bottom Line

Well, that’s all we have here about how you can fix if your Hisense TV won’t turn on. We hope this guide has helped you. We want to tell you that all TV issues are either capacitor issues or motherboard issues. And in case the above fixes didn’t help, one of the both might have been damaged. In that case, it is best to visit the service centers once.



Please enter your comment!
Please enter your name here