- JLab Wireless earbuds are top-rated in 2024, but their unique charging port placement can confuse users
- To charge the earbuds, place them in the wireless charging case and connect the case to a charger using a USB Type C cable
- Troubleshooting tips include checking the charging cable, cleaning the charging port, testing the power source, and considering a battery replacement if issues persist.
At the time of writing, JLab Wireless earbuds are considered to be the best wireless earbuds in the market right now. As a result, a horde of new users are rushing to purchase it. However, after purchasing, a lot of users get confused with the peculiar charging port placement of these earbuds. If you are also disturbed by the same, here’s our guide to help you charge JLab wireless earbuds in the easiest way.
Why Charge JLab Wireless Earbuds?
The answer is simple, if you don’t charge, your JLab wireless earbuds won’t work the next time you plug in. Also, the architecture of JLab Wireless earbuds is built as such that you are required to charge it every 20 hours you continuously use it.
However, the best part is that whenever you put your earbuds in the charging case, it starts charging. However, with time, even the charging case runs out of juice and needs to get charged.
How to Charge JLab Wireless Earbuds?
If your JLab wireless earbuds are out of juice, you can charge them as you please. Here are some simple steps that will make charging your JLab wireless earbuds easier than already it is:
Step 1: Put the Earbuds in the Case
The JLab Wireless Earbuds sport a wireless case that is used to keep them safe. In addition, the case also acts as the charging medium for the JLab earbuds. If you want to charge them, putting them back in the case is the first step.
Step 2: Connect the Case to a Charger
The JLab wireless earbuds charger case comes with a USB Type C Port. However, the USP Type C cable is not supplied. You can use any brand cable or any cable available at your disposal.
Step 3: Check for the Notification Light
As you as you connect the USB Type C cable and turn on the power supply, you will notice a red LED light glowing at the bottom.
Step 4: Unplug When Charging Complete
When the charging is complete, you will see that instead of a red LED, a green permanent LED will glow up. When that glows up, you can simply remove the JLab wireless erabuds from the charger and start using it or keep it for using later.
How to Charge JLab Wireless Headphones
If you are using headphones instead of Earphones, you are in for luck because it does not involve putting them in any case or anything like that. With that being said, here are the steps to charge JLab Wireless headphones:
Step 1: Locate the Charging Port
The first step is to locate the charging port. If you are new to this, you can find this a difficult step. The charging port is usually located at the side of the right ear cup. If you are using an old model, the charging port could be behind the left ear cup.
Step 2: Plug in Charging Cable
The next step is as easy as it can get. Depending on the model of your JLab headphones, you need to plug in the charging cable. If you are using a relatively new JLab wireless headphone, your device will support Type C charging.
On the other hand, if you are using an old device, you need to look out for a Type B charging cable. When your JLab wireless headphones start charging, the LED light will turn red.
Step 3: Unplug the Charger
When charging is complete, and your battery is charged to 100%, your red color LED will change to green. As a result, you are now ready to unplug the charger. Simply pull of the charging cable and start using your headphones.
How to Fix JLab Wireless Earphones Not Charging?
Now that you are aware of charging your JLab Wireless earphones and headphones, you might be happily charging it. However, for some users, this is not always the case. As a result, some users are often disturbed when their JLab wireless earphones are not charging, if you are one of them, here are some ways to fix it.
Fix 1: Check your Cable
When you put your JLab Wireless earphones or headphones into charging, and it is not charging, check whether the charging cable is in good condition or not.
Sometimes, it is possible that the charging cable is damaged. If you are using the same charging cable for multiple devices, such as your phone or tablet, and to charge your JLab wireless earbuds, it is possible that it is damaged. Try with another cable and check whether it is working or not.
Fix 2: Check For Dust in the Charging Port
The next problem that can cause obstructions in charging and result in JLab Wireless earbuds not being able to charge is dust. Dust is omnipresent, and it can get into places you cannot see. If you are regularly using your JLab Wireless earbuds outside in polluted areas, there might be dust. Here’s a simple way of clearing the dust out:
- Take a needle or a safety pin.
- Put a cotton on the needle. Wrap it in some way so that it does not fall.
- Spray some isopropyl alcohol on it.
- If you cannot find isopropyl alcohol, use water, but don’t make the cotton completely wet.
- Now, insert the needle and clean it properly. Rotate it thoroughly without damaging anything.
When everything is done, let it dry. If you use isopropyl alcohol, there is no need to worry. When it is dry, put it on charging and check whether it is charging or not.
Fix 3: Check the Source
If, after cleaning, your JLab Wireless earbuds are not charging, it is possible that your charging source is fine or not. Sometimes, the power plug is faulty, and you might be blaming your device or charging cable. If you are not sure about this, put something else on the power supply and check whether other things are working fine or not. Next, put your JLab Wireless earphones on charging with another power source.
Fix 4: Change Your Battery
If you are always experiencing issues with your JLab Wireless earphones, it is possible that the battery is near the end of its life. An easy way to find it out is to check whether your JLab Wireless earphones always need to be charge or not.
If yes, your battery is dying. Moreover, if you notice that even when fully charged, your earbud quickly discharges, it is a clear sign that your JLab Wireless earphones need a change of battery.
When you successfully follow these fixes, the issue of your JLab Wireless earphones not charging will be fixed. The fixes are the same for JLab Wireless headphones as well.
ALSO READ:
- Fastest APN for QLink Wireless 2024: QLink APN Settings
- How to Connect Sony Headphones to Mac 2024: Quick Guide
- How to Fix Bose SoundSport Wireless Headphones Not Turning On
- How to Fix Headphones Not Working In Windows 11
- Top 7 Ways to Fix Skullcandy Indy Evo Won’t Pair Together
- How to Pair Altec Lansing Bluetooth Speaker with Android, iOS & Windows
- Top 7 Best Sound Equalizers Software For Windows 11
