If you are planning to purchase Starlink, aside from looking at whether it is available in your area, you should think about buying a Starlink ethernet adapter. In the case of Starlink, to bridge the gap between your wireless Starlink network and a wired one, Ethernet Adapters is one of the best purchases you can make.
Ethernet adapters are popular because wired connections are faster and more reliable than wireless ones, but wireless connections are easier to manage. It’s not difficult to place an order for Starlink accessories, but there are a few steps you should take into account before visiting the official Starlink store. This article will therefore detail the process of placing an order for a Starlink Ethernet Adapter.
How To Buy Starlink Ethernet Adapter
If you have already purchased the Starlink starter kit and your order is in progress, you can go ahead with the steps. However, if you have just paid the initial fee and haven’t received ID and Password, you should probably wait. If you are thinking about how you can buy the Starlink Ethernet adapter, follow these steps:
- Reserve Starlink by making the initial payment of $99.
- Wait until Starlink renews your order from the waitlist.
- Users who are in pre-order status cannot purchase the adapter until they are upgraded to full order.
- Once your order status has been upgraded to Full Order, go to Starlink Shop and purchase the router.
That’s it. It is as simple as that. However, you have to keep in mind that if your order is not in the complete stage, you won’t be able you this ethernet adapter. This is mainly because you don’t have the Login ID and Password for the Starlink website. This login ID and password are sent to you via email when your order is in progress.
Additionally, you don’t even be able to access Starlink Shop if you haven’t received the login ID and password.
Is the Starlink Ethernet Adapter Worth It?
Yes definitely. Starlink, in general, doesn’t come with a wired connection. It only supports WiFi. As a result, you have to rely on the Ethernet Adapter if you want to connect a device that doesn’t support WiFi. Sometimes, a wired connection is better if you are facing issues with your TV or gaming console.
Furthermore, looking at PCMag’s post, we can clearly see that due to the slow order progress by Starlink, people around the corner are selling the Ethernet Adapter for as high as $300. Looking at this, you can clearly understand the worth of Starlink Ethernet Cable. For the record, the ethernet adapter costs a mere $25. Clearly, $300 is too much asking for that. On the contrary, the delivery speed of Starlink looks like forever.
How to Setup Starlink Ethernet Cable?
The Starlink Ethernet Adapter requires minimal effort during installation and immediately begins functioning. There is no need for special equipment or technical knowledge. Just follow these steps carefully:
- Remove the Starlink router’s plug from the wall socket.
- Make sure both the dish and router are turned off.
- Wait for 2-3 minutes until the whole power is gone.
- Now remove the Starlink antenna cable from the bottom of the Starlink router.
- Now plug in the Starlink Ethernet Adapter exactly whether the Starlink Antenna cable was.
- Next, connect the Starlink Antenna Cable to the connector on the Ethernet Adapter.
- Connect everything to your wall socket and turn on the power.
What is the Starlink Ethernet Adapter Compatible With?
The Starlink Ethernet Adapter is compatible with every Starlink hardware, including the residential and RV units. If you are thinking, the adapter is compatible with both normal and the high-performance dish. Here’s our guide to help you with the Starlink’s high performance dish.
There is no Ethernet port on the WiFi router that comes standard in the RV and home hardware bundles. Therefore, the Starlink Ethernet Adapter is required if you’d rather use a wired Ethernet connection to the internet than a wireless one.
Can I Purchase the Ethernet Adapter Before Purchasing Starlink?
For those who are interested in buying Starlink add-ons separately from the main kit, the answer is No! Adapters and other accessories are hard to come by if you don’t already own the Starlink starter kit.
Further, you won’t be able to access the Starlink Shop if you do not purchase the kit. However, since they do not regulate the sale of the Starlink kit, you can get a variety of Starlink add-ons from different retailers or third-party stores.
The Bottom Line
Well, that’s all we have here about how you can buy the Starlink Ethernet Adapter. We hope this guide has helped you. Now you know why you are unable to purchase it directly because you haven’t received the ID and Password from Starlink yet.
Also, for the people who are thinking of buying it from someone else, there’s no point in spending $300 on this thing, wait for some time until you get Starlink installed and then you can purchase whatever you want.
ALSO READ:
