HomeHow ToHow to Get Water Out of Phone's Charging Port

How to Get Water Out of Phone’s Charging Port

-

Key Takeaways
  • Charging a wet phone is unsafe and can damage the charging cable and port, leading to electrical shocks.
  • To remove water from the charging port, gently tap the phone, dry the surface with a soft cloth, and leave it to evaporate naturally.
  • If the port is still not working, use a wireless charger or seek assistance from customer support.

Do you accidentally drop your phone on water or any liquid substance? If so, then it might be a headache for many users as not every phone comes with an IP rating or waterproof feature. Well, thatโ€™s the reason why we are here. Today, in this comprehensive guide, you will learn about some amazing tricks using which you can use to resolve the water damage issue with your phone. So, if you want to knowย how to get water out of the charging port, read this guide until the end.

Is Charging Your Phone While Itโ€™s Wet Safe?

Is Charging Your Phone While It's Wet Safe?

While itโ€™s still wet, charging your phone can result in unwanted issues. Both the charging cable and the pins inside the charging point are susceptible to damage. These could stop working, which would affect the mobile device accessories and the charging port.

In the worst-case situation, charging a wet smartphone could result in electric shocks. Therefore, charging a phone while itโ€™s still wet is never a good idea.ย 

How Do I Get Water Out of the Charging Port? iPhone/Android users

First of all, we strongly advise against clicking the โ€œEmergency Overrideโ€ option. Hold on, donโ€™t be alarmed. Get rid of the extra water by gently tapping on your phone. When working with electrical cables, wear gloves. Furthermore, avoid attempting to insert any pointed objects into the charging port because doing so may interfere with connectivity.

Get Rid of Moisture

Get Rid of Moisture

The first step that needs to be taken by users is to dry off all the Moisture from the charging portโ€™s surface in order to fix if your phone accidentally dropped into the water and now you want toย get water out of the charging port. You can reach for a towel, but using a soft, light fabric cloth will absorb more quickly.

The towel should be gently rubbed inward to absorb as much Moisture as possible. Be gentle; being hard may harm the port or force additional water inside. Allow your phone to dry naturally for 30 minutes or so.

Leave it for Evaporationย 

Waiting for the Moisture to evaporate gradually is the best method toย get water out of the charging port. The Moisture that has been retained inside the port should often disappear on its own after a few hours. Be sure to place your gadget in a well-ventilated, upright position.

Use a Portable Charger

Use a wireless charger if the above solutions donโ€™t work to charge your phone using a charging cable after youย get water out of the charging port. Before you plug your phone in, make sure itโ€™s dry from the outside at the back.

Speak with customer support

If none of the above techniques works and you are aware that the charging port is broken, you could try contacting customer support. Users of Android can access their help page by visiting their official website. Even better, you can get prompt assistance by going to the nearest walk-in service centre.

Visit the companyโ€™s website and navigate to the Apple Support section if you have an iPhone. If the above repairs donโ€™t work, you could also try taking your iPhone to a nearby walk-in service centre.

Other Approaches: Myth or Useful?

There is plenty of advice available for simple fixes toย get water out of the charging port. If youโ€™re in a hurry, you might want to attempt some of these fast and easy methods, but the majority of them are ineffective and may even harm your device more. Letโ€™s clarify some myths that are widely held yet actually cause more harm than benefit.

1. Dry in the sunlight

Itโ€™s a widespread belief that letting your phone dry out in the sun would work as a solution. But did you realize that exposure to the sun for an extended period might permanently harm your device?

High temperatures have the potential to seriously harm your phoneโ€™s internal parts. It can cause the battery to overheat and the tiny circuit to bend, permanently damaging its internal components.

Additionally, exposure to sunlight for an extended period of time might break the screen and create blurriness, which makes the touch-screen unresponsive.

2. Try to Dry your Phone inside the Jar of Rice

Try to dry your phone inside the jar of rice

Placing your moist phone inside the jar of rice grains is another common method for speeding up the drying process. Itโ€™s a tried-and-true technique for getting water out of your wet equipment.

As common as the method may sound, it may really cause more harm to your phone. While rice can absorb Moisture, it may also leave behind tiny dust and dirt inside the USB port, which might cause extra issues. Silica gel packs could be kept nearby as an alternative to get water out of the charging port.

3. Fabric Wipe

Fabric wipe

Another dangerous idea is inserting a cotton ball inside the port. It is never a good idea to force anything inside. A cotton ball pushed inside will either force more water inside or, worse yet, could weaken the portโ€™s connection points.

4. Try through hair Dry

Also, refrain from using a blow dryer. Blowing air into the port may cause the water to go deeper within, which is more detrimental than beneficial. Heat-sensitive parts include the battery, seals, and screen.

ย The sections of the port can be harmed by blowing hot air straight into it. Despite the fact that some phone parts can withstand heat, sensitive internal parts can be damaged, so itโ€™s better to keep your phone away from hair dryers.

5. Allowing Your Phone to Rest

You shouldnโ€™t leave your phone sitting around while itโ€™s still wet for too long since corrosion can develop as a result. This process is slowly damaging the internal components of electrical devices. You can see corrosion buildup over the few weeks it takes for the environment to adjust.

False Liquid Detection Alerts: How are they Fixed? iPhone/Android Users

Even when youย get water out of the charging port, there are situations when you receive misleading moisture detection alarms. Hereโ€™s how to fix the issue:

1. Turn off the Moisture Alert

If you are assured that the port is dry, you can turn off the moisture detection alert in the settings.

  • Access Settings
  • Select Battery Usage.
  • Click Recent Battery Usage at the bottom of the page.
  • Select Android System.
  • Then click on Force stop.

2. Upgrade Your Device

Minor issues can be fixed by updating the OS. If there has been a software update, your problems with bogus liquid alteration may be fixed.

3. Replacement of the Charging Cable

Examine the charging wire to see whether it is damp or if any damage has resulted in false alarms. You may disable these alerts by switching the charging cable.

4. Reboot your device in Safe Mode

After a power cycle, you can restart your phone in safe Mode if you still get false alarms.

Users of Android:

  • Turn off your phone for a short duration of time.
  • For two to three seconds, hold down the power button. Confirm Restart in safe Mode should appear as a pop-up notification.
  • Click the โ€œOKโ€ button.

Users of iPhones:

  • Turn off your iPhone for 30 seconds.
  • now switch on your iPhone
  • Hit the side button while it is turning on until the Apple sign appears.
  • Your iPhone automatically enters Safe Mode when you restart it.

5. Check the Charging Port for Rust.

False warnings may be generated by rust or other tiny particles that have become lodged inside the port. Check with a flashlight, but avoid inserting any pointed objects.

6. Consider a Complete Factory Reset.

You might wish to choose a โ€œFull Factory Resetโ€ if nothing else works. Itโ€™s critical to understand that a complete factory reset will erase all of your data, including contacts and photos. Decide to have a storage backup, therefore.

Itโ€™s recommended to do a full factory reset at the very end after all other options have failed because it cannot be undone.

Users of Android:

  • Access Settings.
  • Then select Reset and Backup.
  • Then, tap the Factory Data Reset button.Factory Reset Your Device
  • Now, choose Delete Everything.
  • This might change depending on the model and the brand youโ€™re using.

Users of iPhones:

  • Access settings.
  • Go to General Settings.
  • Next, select Reset iPhone.
  • Then, choose โ€œReset All Settingsโ€ from the menu.Cannot Verify Server Identity on iPhone

Conclusion

Your phone is now entirely dry if you donโ€™t see any additional changes in its moisture/liquid sensing settings. So, now you know how to get water out of the charging port. Therefore, now enjoy using your phone. We hope that you find this article helpful. But, for any further queries, comment below and let us know.ย 

RELATED GUIDES:

Daniel Carver
Daniel Carverhttps://itechhacks.com/
Daniel is a senior content writer at the iTech Hacks. He's having 8 years of experience in Technology and troubleshooting topics. Coming from a background of engineering, you will often see his writing stuff related to How To's, Android, and iOS.

LEAVE A REPLY

Please enter your comment!
Please enter your name here

LATEST