Top 7 Ways to Fix Skullcandy Indy Evo Won’t Pair Together

With Skullcandy Indy Evo earbuds, you’ll get a beautiful design, surprising audio quality, and easy-to-use features. It is possible, however, that they may encounter pairing issues from time to time, just as with any electronic device. There is a common problem with users not being able to pair their Indy Evo earbuds together. There is no need to fret, as we have some troubleshooting steps that will help you Re-Sync Skullcandy Indy Evo by fixing the not pairing together issue. So, let’s check out the guide. 

Common Reasons for Skullcandy Indy Pairing

There are several factors that can lead to the Skullcandy Indy Evo earbuds not pairing with each other. In order to troubleshoot and resolve the problem more effectively, you may need to consider these factors. These are a few common reasons:

1. Interference: Signals transmitted by Bluetooth may be disrupted if they are interfered with by other electronic devices or by physical obstructions. Make sure that the earbuds aren’t interfered with by anything and that there are no obstacles between them.
2. Low Battery: Depending on which earbud has a lower battery level, the connection may not be able to be established. You should ensure that both earbuds are sufficiently charged before pairing.
3. Outdated Firmware: You must keep your firmware up to date in order to maintain optimal performance. It may be necessary to update your Indy Evo earbuds’ firmware, as outdated software can cause pairing problems.
4. Connection Timeout: Earbuds may experience a connection timeout if they remain disconnected for a prolonged period. If the issue persists, you may need to repair them.

It’s now time to go through the step-by-step guide to re-syncing your Skullcandy Indy Evo earbuds.

How to Sync & Fix Skullcandy Indy Evo Not Pairing Together

So, here are a few methods that you can try to troubleshoot the Skullcandy Indy Evo Not Pairing Together issue: 

Restart Skullcandy Indy Evo

The Skullcandy Indy Evo may not pair together if they have not been restarted. As a result, minor software glitches, which are the true cause of most problems, will be removed. To restart your Skullcandy Indy Evo, follow the steps below.

1. The first thing you need to do is press the power button for more than 10 seconds in order to turn your Skullcandy Indy Evo off.
2. After that, turn it on by pressing the power button for 10 seconds. 

You can now pair your Skullcandy Indy Evo buds by placing one in the charging case and another in the other. 

Follow the Correct Pairing Procedure

Pair the Skullcandy Indy Evo earbuds according to the instructions. For instructions, see the user manual. But, in case you don’t have it, here are the steps to pair the Indy Evo earbuds correctly:

1. To pair your earbuds, make sure they have been charged for at least 10-15 minutes in the charging case.
2. Go to the Settings menu of your smartphone or tablet and select Bluetooth.
3. Plug both earbuds into the charging case and turn them on. When the earbuds are in pairing mode, their LED lights should be blinking white.
4. On your smartphone or tablet, search for “Skullcandy Indy Evo” and select it. Put the earbuds back in the charging case and take them out again if they don’t appear on your device.
5. You will be able to select the earbuds on your smartphone, and the Skullcandy Indy Evo earbuds will automatically connect to your device. When the earbuds are connected, a voice prompt will appear.
6. Once your earbuds are paired with your device, you’re ready to listen to your favourite music.

Physical Damage

There is a possibility that physical damage has caused the Indy EVO earbuds not to pair together. Pairing issues can also be caused by physical damage to the earbuds or their charging case. 

For further assistance, contact Skullcandy customer support if you notice any damage to the earbuds or case.

Update Firmware

There is a possibility that the earbuds will not pair if they are not running the latest firmware. If you want your earbuds to pair together, you’ll need to update them through the Skullcandy app. Follow these needy steps below to update your Skullcandy Indy Evo earbuds’ software:

1. The first thing you need to do is download Skullcandy’s app to your smartphone or tablet. If you have an iOS-powered phone, you can download it from the App Store. On the other hand, if you have an Android, download it from the Google PlayStore.
2. Put both earbuds in the charging case and open it. To use them, you will need to make sure they are connected to your device via Bluetooth and that they are turned on.
3. On your device, open the Skullcandy app and select “Indy Evo.”
4. You will automatically be notified if there are any updates available once you connect your earbuds. Thus, to download and install an update, follow the instructions on the screen.
5. You may need to wait a few minutes for the update to finish, so do not disconnect your earbuds or close the app during this time.
6. Your device will display a confirmation message after the update is complete. In the app, select “About this Product” under “Settings” to see the firmware version of your earbuds.

Reset The Earbuds

There is a lot to do here. You can power cycle or reset your earbuds after disconnecting them from your phone and turning them off. To reset your Skullcandy Indy Evo, follow the steps below.

1. You need to charge your Indy Evo earbuds with the charging case.
2. Ensure that your Indy Evo is not paired with any devices.
3. Then, turn off your device’s Bluetooth.
4. Once the charging case is removed, turn on the right earbud.
5. Next, tap four times on the center of the right Indy Evo bud. It will automatically shut off after several minutes, and the LED light will turn red. If the LED doesn’t flash red, repeat this process until the LED flashes red. Place the right bud back into its case after resetting.
6. Once the left earbud is removed from the case, turn it on by pressing on its center four times until it has been reset successfully. Once the charging case is full, place the left bud inside.
7. Once both buds are removed from the charging case, they will automatically connect. There will be a sound that indicates both buds have been paired. 

Charge Earbuds and Case

Possibilities are there for Skullcandy Indy Evo earbuds and their case to have pairing problems due to their low battery life. It is, therefore, essential that you fully charge your headphones and their charging case.

It will only take one hour for both earbuds to fully charge from 0% to 100%. Furthermore, the charging case will take 2 hours to charge from 0% to 100%. Additionally, make sure the charging case and earbuds are correctly charged. Once the buds are fully charged, pair them together. 

Contact Customer Support

If the earbuds still do not connect, Skullcandy support might be able to provide you with more elaborate troubleshooting instructions. Hence, let them know about the solutions you’ve tried. You can request a replacement pair if the warranty is still active. 

ALSO READ:

• How to Pair Altec Lansing Bluetooth Speaker with Android, iOS & Windows
• How to Pair Sony WF-1000XM4 on Phone, PC, Laptop, TV
• How to Fix Logitech K400 Plus Not Pairing to Bluetooth
• How to Connect and Pair Airpods to Windows 11 PC Laptop
• How to Connect JBL Speakers Together or Link/Pair JBL Speakers