HomeGuidesHow to Fix YVM302 BT Error Code on YouView Box

How to Fix YVM302 BT Error Code on YouView Box

-

While using YouView Box, users have reported facing signal issues on their TV screens. The issue was encountered with an error code ‘YVM30T’. No one wants to face signal issues while they are in the mood to relax and watch TV, but issues like such can ruin the experience. YVM302 BT error code is encountered when there is not enough signal.

Fix bt.com/tverrors Code on YouView Box

There’s nothing to worry about; we have covered you with troubleshooting steps to fix YVM302 BT Error Code on YouView Box. 

Fix YVM302 BT Error Code on YouView Box

Restart Box

If you have been facing this signal issue, you must try restarting your box. To do so, simply press and hold the Power button for a few seconds and then release it once the screen turns on. This will restart your Box. Once done, the issue should no longer be encountered. However, if you still face it, you should move to the next troubleshooting step in this article.

Check Whether Cables Are Properly Connected Or Not

Ensure the cables are correctly connected. You will likely face signal issues when the Ariel cable is lost and not properly connected. Connect the Ariel cable properly to the Ariel In/Antenna In port on the box and on the Ariel socket. 

Also, check for the damages on the cable. If the cable is damaged, then that may also cause the issue. If the cable is damaged, then replace it and check if you still face the issue or not. 

Check Signals

Check if you are getting proper signals or not. If the signals from Ariel are weak, you will keep getting the YVM302 BT error code. To check signals, follow the steps given below-

  • Open Menu on your ViewBox, and then head to Settings. 
  • Here, under Signal & Connection select Signal Quality and check the quality of the signal. 

If the signal is weak, then readjust the ariel. Sometimes, you may experience weak signals due to poor weather. In that case, you will have to wait until the weather is clear. If the signals are strong, we recommend you follow the next step. 

Retune Channels

Try retuning the channels to fix the issue. Returning the channels did work for many users facing signal issues. You can retune channels by following the steps given below-

  • Head to Settings from the menu. 
  • Then under the Signal & Connection, select TV Channels. 
  • Now, select Retune Channels. 
  • This might take some time, so be patient and wait until the process is completed. 
  • Once done, check whether you are still facing this issue or not. 

Get Maintenance Done

Many times, fixing the issue may be out of your hands. This generally occurs when the transmitter requires maintenance which can make the signals poor. You can head to the Freeview website to know whether your transmitter is affected or not. If you do not know your transmitter, you can check it through the Freeview Home Checker page. 

Switch To Internet Mode

You can switch to internet mode to get the channels if you have a box with internet mode enabled. You will have to perform maintenance mode to switch to maintenance mode. Either you can go for maintenance mode or reset your box to switch to the internet mode from cable mode. 

Contact FreeView Advice Line

You should no longer encounter the issue after following the above steps. However, you can contact the FreeView Advice Line for further assistance if the issue is still not solved. You can contact the FreeView Advice Line on 03456 50 50 50. Reach out to them, and tell them your issue. They will help solve the issue you have been facing.

Final Words | bt.com/tverrors

Facing signal issues is common with cable TV. If you have been facing YVM302 BT Error Code on ViewBox, then there is nothing to be worried about. We have listed some troubleshooting steps in the article above that will help you fix this issue. 

FAQs

How Does YVM302 Mean?

YM302 is a signal error that you may get with YouView Box. This error generally occurs due to unstable or poor Aerial signal faced by the YouView box. 

How To Fix BT Box Not Picking Up Aerial Channels?

If the BT box does not pick up the channels, we recommend you retune the channels. To do so:

  1. Head to the Settings on your box.
  2. Select Signal & Connection and then on TV Channels.
  3. Select Retune Channels to retune the channels. 

What Aeriel Do I Need For YouView Box?

It is recommended to use a rooftop aerial for best results. However, you can also use loft ariels or indoor aerials. 

Why Is My BT YouView Not Working?

If you face issues with BT YouView, we recommend restarting your box. This should most probably fix the issue. However, if the issue is still encountered, try updating the software.

How Can I Improve My Aerial Signal?

If you want to improve Aerial signals, we recommend installing the aerial outside; if possible, install it higher up. You can install a higher-gain TV aerial, Masthead Amplifier, and good-quality cable for better results. Remove any splitters if you have them. 

RELATED GUIDES:

Anurag Jain
Anurag Jainhttps://itechhacks.com
Anurag is a Senior content analyst with 4 years of experience in the industry. Based in India, He is extremely skilled at Windows related to How to Troubleshooting matters. His favorite topics are Windows 11, Android, and How To's.

LEAVE A REPLY

Please enter your comment!
Please enter your name here

LATEST