QLink Wireless provides internet connection to lifeline-eligible customers. However, these customers are often not quite accustomed to Qlink Wireless’ features of APN settings. If you are one of them, this guide is only for you. Usually, a lot of QLink wireless customers have started facing internet issues. The issue might be related to the signal as well. However, the main problem seems to be due to APN settings. As a result, here’s our guide to APN settings for QLink wireless and fixing your internet.
What are the APN Settings?
APN stands for Access Point Names. These access points are crucial for your internet to work efficiently. Efficiently would be a wrong word. APN settings are very important for your Q Link wireless to actually work at first.
When you’re using your mobile device to get online, it talks to the cellular network using a data connection. The APN setting is like the key that helps your device connect to the network smoothly.
It contains important details like the name of your network, the type of connection (like 4G or 5G), and any other settings needed for your device to chat with the network. If there’s a username and password required, it’s in there too.
So, basically, APN settings make sure your device and the cellular network can have a good conversation and keep you connected. With that being said, we will now show you all APN settings for QLink wireless.
What are the APN Settings for QLink Wireless?
In QLink wireless, the APN settings mean Access Point Name settings. Now, if you are thinking there is a problem ongoing with your internet or other internet services such as MMS, you might need to alter the APN settings for QLink Wireless. In that case, it is best that you follow this guide till the end.
How to Set APN Settings for QLink Wireless?
There are two methods of setting APN settings on QLink Wireless because there are two types of devices. In the first section, we will discuss about setting the APN on an Android Smartphone while in the next section we shall discuss about doing the same on an iPhone.
Set APN Settings for QLink Wireless on iOS Device
If you are using an iPhone or a iPad with calling function, you can set QLInk wireless APN by following these simple steps:
- Pull up the Control Center.
- Turn off Data Connection.
- Now, go to Settings.
- Tap on Cellular.
- Next, tap on Cellular Data Network.
- Now, change the settings according to this chart:
- Settings: Details
- APN: qlink
- Username: blank
- Password: blank
- MNC: 240
- MCC: 310
- Bearer: Unspecified
- MMS Proxy: blank
- MMSC: http://wholesale.mmsmvno.com/mms/wapenc
- MMS Max Text Size: 1048576
- MMS UA Prof URL: “http://www.apple.com/mms/uaprof.rdf”
- Now, close everything and come to home.
Now, try using the internet and check whether it is working perfectly or not. This is how you change the APN settings on QLink wireless on an iOS device.
Set APN Settings for QLink Wireless on Android Device
If you are using an Android smartphone with QLink wireless, here are the steps you need to follow in order to set APN:
Name:QLink APN: qlink MMSC: http://wholesale.mmsmvno.com/mms/wapenc MCC: 310 MNC: 240 Username: Not Set Password: Not Set APN Type: default, supl, MMS APN Protocol: IPv4/IPv6 APN Roaming Protocol: IPv4/IPv6 Bearer: Unspecified
- Open Settings.
- Tap on Mobile Network.
- Select your SIM if you are using a Dual SIM phone.
- Tap on Access Point Names.
- Tap on + icon at the top corner.
- Enter the following values:
- Name: QLink
- APN: qlink
- Proxy: blank
- Port: blank
- Username: blank
- Password: blank
- Server: qlinkwireless.com
- MMSC: http://wholesale.mmsmvno.com/mms/wapenc
- MCC: 310
- MNC: 240
- APN Type: Internet
- That’s it. Now tap on the Tick Mark at the top right corner.
This is how you set APN on an Android Smartphone. However, unlike iPhone, you cannot directly use the internet. You need to shut down your phone for 2 minutes and then restart it.
How Long Does APN Take to Go Live?
As opposed to inserting and activating a SIM card on your phone, activating an APN on a phone is different. While a SIM card is immediately activated as soon as you insert it, an APN takes time. In some cases, an APN takes even 4 hours to get completely activated and let you use the internet.
If you have recently purchased a QLink wireless with your Lifeline card, you will receive automatic APN settings via message. However, if you didn’t, you can try the guide above and setup the QLink wireless APN yourself.
Is QLink Wireless APN 5G?
The APN settings on your QLink wireless do not make sure that you will be able to use 5G internet or not. Using 5G is only possible if your phone supports it. Also, 5G network is depend on the place where you reside. If 5G is available near or in your home, you will be able to use 5G. However, always keep in mind that the APN settings of your QLink wireless are not responsible for 5G internet.
Other than this, if you are using a 5G plan, only then you will be able to access 5G internet. Else, you will be able to use only 4G LTE internet.
What If Your Internet Is Still Not Working?
The usual reason to set APN settings in Qlink Wireless is that your internet is not functioning properly. In general, slow internet or absolutely no internet problems can be easily fixed by setting up a new APN. However, if setting a new APN is not working for you, it is possible that you don’t have a signal. We have discussed this problem in detail in our guide to fix the QLink wireless hotspot.
Other than this, it is also possible that you might not have a valid internet plan. If everything is fine, you should simply try turning on Data Roaming, and your problem should be fixed.
If nothing is helping, the last option you have is to contact customer support as they would be able to help you correctly and identify your problem. You might also take your phone to the nearby QLink store to get it fixed.
ALSO READ:
